Metrology Material, Precision Measuring, Hardness Testers Phase II Plus Register
Free Catalog
21 Industrial Ave.
Upper Saddle River, NJ 07458
Phone: 201-962-7373
Toll Free: 800-526-9087
Fax: 201-962-8353

Portable Hardness Tester
With both Integrated and External Probe

Model No. PHT-2000

The PHASE II portable hardness tester, Model No. PHT-2000 is an advanced integrated hardness tester distinguished by its very compact size, high accuracy, wide measuring range and simplicity of operation. It is suitable for testing the hardness of all metals and widely applied in many areas of industry.

The PHT-2000 portable hardness tester combines the universal impact device D and a data processor in a single unit. It automatically computes all Vickers, Brinell, Rockwell and Shore hardness values. RS232 output enables this new model to print any of it s memory from up to 2000 locations. The impact direction can be set so that the accurate values can be achieved at any angle, even upside down! Statistical mean value is automatically provided.

The measuring method of the PHT-2000 is defined as  the quotient of the impact body s rebound velocity over its impact velocity . Optional accessories include various support rings to meet the requirements of specialized convex or concave applications. External probes are also available for an assortment of applications.
portable hardness tester dynamic rebound principle
Technical Specifications:
* Dimensions: 6.10 x 2.36 x 1.49 (155 X 60 X 38mm)
* Impact Device: D
* Impact Energy: 8 Ft-Lbs (11nmm)
* Test Tip: Tungsten Carbide
* Measuring Accuracy: +- 0.8% (Corresponding To +- 1 Hrc At Hrc=58)
* Max. Hardness Of Sample: 980hv
* Weight: 0.48lb (220g)
* Impact Direction: Any Angle
* Operating Temperature: 32 To 122 Degrees F (0 To 50 Degrees C.)
* Min. Weight Of Sample: 11 lbs / 5kg
(Less than 5kg To 0.1kg Coupled On Solid Support)
* Min. Thickness Of Sample: 0.2in (5mm) (Coupled: 3mm)
* Min. Thickness Of Layers: 0.8mm
* Min. Radius Of Curved Surface: 1.2in (30mm) (With Support Rings:11mm)
* Power: 2- AAA Batteries (supplied)

* Coupling Paste Is Available For Testing Thin or Small Parts Weighing Less Than 2kg

Materials And Testing Range PHT-2000 (HL:200-900)
STEEL & CAST STEEL 20-68 60-100 93-674 83-976


COLD TOOL STEEL 20-67     80-898  
STAINLESS STEEL 20-62 46-100 85-655 85-802  
GREY CAST IRON     93-334    
NODULAR CAST IRON     131-387    
COPPER/ZINC ALLOYS (BRASS)   13-95 40-173    

The Phase II Tester PHT-2000 Comes Complete
With a Calibrated Hardness Test Block, Plastic Fitted Case and Operation Manual.
Back to Product Listing
Hardness Testers
Ultrasonic Thickness Gauges      Surface Roughness
Coating Thickness      Force Gauges
Vibration Meters      Optical Instruments
  Phase II Plus
21 Industrial Ave.
Upper Saddle River, NJ 07458
Phone: 201-962-7373
Toll Free: 800-526-9087
Fax: 201-962-8353
Click here for a free catalog