| |
| Portable Coating Thickness Gage |
| |
|
DIGITAL COATING THICKNESS GAUGE
MODEL NO. PTG-1000
The PHASE II PTG-1000 can perform two different methods of calculating Coating thickness measurement by utilizing the characteristics of both eddy current and magnetic induction. Both non-destructively and very accurately.
By attaching the appropriate probe (F-or N-type) you can detect either the thickness of nonmagnetic coating on a magnetic substrate or an insulating coating on a non-magnetic conductive substrate.
The PTG-1000 provides two operating modes: direct and application/batch(this mode stores both calibration setting and readings taken). The memory has a storage capacity for up to 3000 readings. Five different statistical parameters can be calculated, displayed and printed.
Using a special calibrating method the thickness of a chromic coating on a copper substrate can be measured. The PTG-1000 also provides a Calibration-through-coating (CTC) feature when only one coated substrates are available for measurement. Also by attaching a special CN200-probe, the thickness of non-magnetic conductive coating (copper, aluminum) on an insulating substrate(plastics, print boards) can be measured. |
|
| |
|
 |
The PHASE II PTG-1000 can be used in many areas of industry including manufacturing, general engineering, commercial inspection, etc.
MAIN FUNCTIONS
- Ten types of probes are available to cover a whole range of special measurement requirements: F-probes (ferrous) and N-probes (non-ferrous)
- Four methods can be used to calibrate the COATER
- Special feature: Calibration Through Coating (CTG)
- Five different statistical parameters can be calculated, displayed and printed
- Two measuring modes can be selected: continuous and single
- Two operating modes are provided: direct and application/batch
- The memory has a storage capacity for up to 3000 readings
- Histogram can be printed out for further analysis for measured values
- Limits can be set, outside limit warning will be given
- Automatic or manual switch off
- Easy deletions of wrong settings or readings
- Retrieval and print out of stored readings if desired
- Buzz prompts next step of operation
- Low battery indicator
- Errors during operation indicated by buzzing and error codes on LCD
- Instrument can be used with or without the integral / removable printer
MAIN TECHNICAL DATA
- Measuring range with all possible probes is 0-10.000 m m max.
- Guaranteed tolerance: +- 1%H +1 m m (where H = nominal value)
- Min. substrate thickness: F1-probe 0.5mm / N1-probe 0.3mm
- Min. diameter of substrate: F1-probe 3mm / N1-probe 6mm
- Operating temperature: 32-113 degrees F (0-45 degrees C)
- Power source: 4 x 1.25V NiMH batteries
- Dimensions (LxWxH) 10.6 x 3.4 x 1.8in. (270 x 86 x 47mm)
- Weight: 1.4lbs (650g)
Related Products
- For individual gages that test in "either" Ferrous "or" non-ferrous substrate environment, please click here for the PTG-2200-2300.
- For a combination Ferrous and non-Ferrous environment, please click here for the PTG-2500.
|
| |
| Back
to Product Listing |
| |
|
|
|
|
|
